Table of Contents
Advertisement
Do a basic scan-to-file job
Do a basic scan-to-file job
Introduction
The main steps of a basic scan-to-file job consists of the following steps.
Feed the original.
Indicate you want to scan-to-file rather that make a copy (select a scan-to-file
template).
Press the green start key.
How to scan-to-file on the flexible scanner
Place the original face down and right aligned according to the illustration below.
1.
The scanner takes the original.
[18]
[18] Place the original face down and right aligned
Select 'Scan-to-file' with the upper-left softkey.
2.
Press the green start key.
3.
The scanner operator panel shows the scan-to-file job number and the status of the
job.
Note: You can scan faster when you feed the original in landscape direction.
Result
The scanner scans the original and the sends the scanned file to the default
scan-to-file destination.
26
Chapter 2 Walk-up user
Advertisement
Table of Contents
