Group 1, Function 1-Amperage Full Scale - GE EPM 5300 Instruction Manual

CHAPTER 10: PROGRAMMING GROUP 1
10.2: Group 1, Function 1—Amperage Full Scale
Also note that the meter reads with digital accuracy to a 2000 count range. Thus all CT and PT full scale
settings in the meter should reflect that limitation. The table above shows the proper settings.
To change the Full Scale Settings:
NOTE: Press MAX/MIN/LIMITS at any time to cancel before storing the last digit or switch.
MAX
MIN
LM1
LM2
KVAH KWH
MAX/MIN
VOLTS AMPS
LIMITS
Step 1:
a. Enter Group Level of Programming Mode
(see Chp. 8).
b. Press MAX/MIN/LIMITS until 1. appears in
upper display.
62
CT T
YPE
Direct Input
600/5
1000/5
2000/5
3000/5
5000/5
Table 10-3: Full Scale Settings for Amps
AC VOLTS
A B C A B C
N N N B C A
AC AMPS
A B C N
POWER
PF
KW
KVA
FREQ KVAR
PHASE
POWER
NEXT
EPM 5000 series Advanced Power Meters
FULL SCALE
05.00 A
0600 A
1000 A
2000 A
03.00 KA
05.00 KA
MAX
MIN
LM1
LM2
KVAH KWH
MAX/MIN
VOLTS AMPS
LIMITS
Step 2:
a. Press AMPS to activate the Group.
b. Press MAX/MIN/LIMITS until 11. appears in
upper display.
! Middle display indicates Scale Factor Setting.
! Lower display indicates Full Scale.
AC VOLTS
A B C A B C
N N N B C A
AC AMPS
A B C N
POWER
PF
KW
KVA
FREQ KVAR
PHASE
POWER
NEXT
GE Multilin