To Check Programmes; Starting And Cancelling Programmes; To Clear A Timer Recording Programme - Panasonic DMR-HS2 Operating Instructions Manual

To check programmes

Press [PROG/CHECK] (13).
The Timer Programme List screen appears.
TIMER
35:39 LP
Remain HDD
RECORDING
No. Name Date Start Stop
01 1 ARD 16/ 7 TUE 20:00 21:00
W
02 5 BR3 MON-FRI 20:30 22:00
A
F
03 2 ZDF 19/ 7 FRI 19:00 21:30
04 1 ARD 20/ 7 SAT 17:00 19:00
X
05 2 ZDF 21/ 7 SUN 20:00 22:30
New Timer Programme
SELECT
CANCEL
RETURN
ENTER
Icon explanations (A)
¥
This programme is currently recording.
W
The programme is overlapped with another programme.
F The disc was full or the maximum number of programmes or
scenes was reached so the programme failed to record.
The television programme was copy-guarded so the
programme failed to record.
X The programme failed to record for some other reason.
Icon explanations (B)
Auto Renewal Recording indicator [HDD]
The programme will be automatically recorded over in
succession.
Relief Recording indicator
Programmes that have been rerouted to the HDD because
of insufficient remaining space.
Recording drive indicator :HDD
Recording drive indicator :DVD
Disc space
OK: Displayed if the recording can fit in the remaining
space on the disc. However, when the programme
becomes longer than scheduled during the
recording by setting "VPS/PDC" to "ON", the
programme may not be recorded until its end.
# (Date):
For recordings made daily or weekly, the display
will show until when recordings can be made
based on the time remaining on the disc.
!: Displayed if the disc is not inserted in the unit or is
write-protected (pages 39, 87) or there is no more
space left on both HDD and DVD-RAM/R.
ªTo change the programme
(page 34)
ªTo exit from the Timer Programme List screen
Press [PROG/CHECK] (13) or [RETURN] (23). (The television is
shown.)
For your reference
≥Programmes that failed to record are deleted from the list at 4
a.m. the day after tomorrow.
4:00 LP
DVD
19:30:00 16. 7 TUE
Disc
VPS HDD
Mode space
PDC DVD
---
SP OK
LP ON 9/8
B
FR ON OK
---
LP OK
---
SP OK

Starting and cancelling programmes

ªTo put the unit on recording standby
Press [Á, TIMER] (12).
The unit turns off and "Á" lights on the unit's display.
Note
≥The unit cannot go to timer recording standby if the disc is
protected (pages 39, 87) or full ("Á" flashes). Check the disc
carefully.
ªTo release the unit from recording standby
If you want to record something else before the programme start
time, for example:
Press [Á, TIMER] (12).
The unit turns on and "Á" goes out.
≥Be sure to press [Á, TIMER] (12) before the programme start
time to put the unit on recording standby. The programme only
works if "Á" is on.
ªTo stop recording while a programme is working
Press [Á, TIMER] (12).

To clear a timer recording programme

Press [CANCEL] (5) or [ERASE] (30) while the programme's
Timer Programme Correction screen is being shown.
Alternatively, use [3, 4] (10) to select the programme in the
Timer Programme List screen and press [CANCEL] (5) or
[ERASE] (30).
≥You can not delete programmes that are currently recording.
36
Timer recording (continued)