Erasing A Programme That Is Being Played - Panasonic DMR-HS2 Operating Instructions Manual

ªWith non-cartridge discs
(1)
(2) (3)
(1) Insert label-up. (With double-sided discs, load so the label for
the side you want to play is facing up.)
q
(2) Guide for 5 (12 cm) disc
q
(3) Guide for 3 (8 cm) disc
When a menu screen appears on the television
[DVD-V] [VCD]
Operate menus with the following operations. Actual operations
depend on the disc.
Press the numeric buttons (4) to select an item, or move
[3, 4, 2, 1] (10) to select an item and press [ENTER] (10).
≥You can return to menus after you start play by pressing
[TOP MENU] (9) or [MENU] (22) (DVD-Video), or [RETURN]
(23) (Video CD).
Note
≥ When playing back a programme recorded on the HDD, ensure
that you match the "TV System" setting to the encoding system
you are using i.e. for PAL recordings set "TV System" to "PAL",
for NTSC recordings set to "NTSC" (page 75).
≥The disc continues to rotate while the menu is displayed even
after you finish playing an item. Press [∫] (7) when you finish to
preserve the unit's motor and your television screen.
≥Volume may be lower when playing DVD-Video than when
playing other discs or during television broadcasts.
If you turn the volume up on the television or amplifier, ensure
you reduce the volume again before playing other sources or
returning to the television so that a sudden increase in output
does not occur.
Playing discs/programmes recorded on HDD (continued)
For your reference
≥If " " appears on the television
The operation is prohibited by the unit or disc.
≥If a disc is loaded, the unit will come on and play will start when
you press [1] (21).
≥If you play a disc that includes parts without video, the unit may
display the video from the disc you were playing immediately.
≥[HDD] [RAM] [DVD-R]
Play starts from the beginning of the most recent recording. If that
programme is extremely short, play starts from the next most
recent recording. Use "TOP PLAY" in the FUNCTIONS window
(page 30) to start play from the oldest programme on the disc
(programme 1).
Erasing a programme that is being
played
[HDD] [RAM] [DVD-R]
1
During play
Press [ERASE] (30).
≥A confirmation message will be displayed.
Erase Programme
Remaining Time 0 : 58 SP
Corresponding PLAY LIST will also be erased.
Erase Cancel
SELECT
RETURN
ENTER
Use [2] (10) to select "Erase" and press [ENTER]
2
(10).
≥Select "Cancel" and press [ENTER] (10), or press
[RETURN] (23) to cancel.
For your reference
≥It is not possible to erase a programme when you are carrying
out simultaneous recording and play (page 29).
≥It is not possible to erase a programme that is in the process of
being recorded.
19