Configuring Static Route For Routing To Another Network - ZyXEL Communications VMG1312-B Series User Manual

Configure the screen using the provided parameters and click Apply.
5
Check the status of VIP and Guest in the More AP screen. The yellow bulbs signify that the SSIDs
6
are active and ready for wireless access.
4.5 Configuring Static Route for Routing to Another
Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to
the Device's LAN. The router may be used to separate two department networks. This tutorial
shows how to configure a static routing rule for two network routings.
In the following figure, router R is connected to the Device's LAN. R connects to two networks, N1
(192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from computer A (in N1
VMG1312-B Series User's Guide
Chapter 4 Tutorials
45