The Wmm Screen - ZyXEL Communications VMG1312-B Series User Manual

Chapter 7 Wireless
Table 23 Network Setting > Wireless > WPS (continued)
LABEL
Release
Configuratio
n
Generate
New PIN
Number
Apply
Cancel

7.6 The WMM Screen

Use this screen to enable Wi-Fi MultiMedia (WMM) and WMM Power Save in wireless networks for
multimedia applications.
Click Network Setting > Wireless > WMM. The following screen displays.
Figure 38 Network Setting > Wireless > WMM
The following table describes the labels in this screen.
Table 24 Network Setting > Wireless > WMM
LABEL
WMM
WMM
Automatic
Power Save
Delivery
Apply
Cancel
118
DESCRIPTION
The default WPS status is configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the Device.
The PIN (Personal Identification Number) of the Device is shown here. Enter this PIN in the
configuration utility of the device you want to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Click the Generate New PIN Number button to have the Device create a new PIN.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Select On to have the Device automatically give a service a priority level according to the
ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of
Service) gives high priority to voice and video, which makes them run more smoothly.
Select this option to extend the battery life of your mobile devices (especially useful for
small devices that are running multimedia applications). The Device goes to sleep mode to
save power when it is not transmitting data. The AP buffers the packets sent to the Device
until the Device "wakes up". The Device wakes up periodically to check for incoming data.
Note: Note: This works only if the wireless device to which the Device is connected also
supports this feature.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
VMG1312-B Series User's Guide