Table 47 Policer Setup: Add/Edit
LABEL
Available Class
Selected Class
Apply
Cancel
10.7 The QoS Monitor Screen
To view the Device's QoS packet statistics, click Network Setting > QoS > Monitor. The screen
appears as shown.
Figure 71 Network Setting > QoS > Monitor
The following table describes the labels in this screen.
Table 48 Network Setting > QoS > Monitor
LABEL
Refresh Interval
Interface Monitor
#
Name
Pass Rate
Drop Rate
Queue Monitor
#
Name
Pass Rate
Drop Rate
VMG1312-B Series User's Guide
DESCRIPTION
Select a QoS classifier to apply this QoS policer to traffic that matches the QoS classifier.
Highlight a QoS classifier in the Available Class box and use the > button to move it to the
Selected Class box.
To remove a QoS classifier from the Selected Class box, select it and use the < button.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Enter how often you want the Device to update this screen. Select No Refresh
to stop refreshing statistics.
This is the index number of the entry.
This shows the name of the interface on the Device.
This shows how many packets forwarded to this interface are transmitted
successfully.
This shows how many packets forwarded to this interface are dropped.
This is the index number of the entry.
This shows the name of the queue.
This shows how many packets assigned to this queue are transmitted
successfully.
This shows how many packets assigned to this queue are dropped.
Chapter 10 Quality of Service (QoS)
177