The Stb Vendor Id Screen - ZyXEL Communications VMG1312-B Series User Manual

Chapter 8 Home Networking
Table 34 Network Setting > Home Networking > Additional Subnet (continued)
LABEL
Offer Public IP
by DHCP
Enable ARP
Proxy
Apply
Cancel

8.8 The STB Vendor ID Screen

Set Top Box (STB) devices with dynamic IP addresses sometimes don't renew their IP addresses
before the lease time expires. This could lead to IP address conflicts if the STB continues to use an
IP address that gets assigned to another device. Use this screen to list the Vendor IDs of connected
STBs to have the Device automatically create static DHCP entries for them when they request IP
addresses.
Click Network Setting > Home Networking > STB Vendor ID to open this screen.
Figure 56 Network Setting > Home Networking > STB Vendor ID
The following table describes the labels in this screen.
Table 35 Network Setting > Home Networking > STB Vendor ID
LABEL
Vendor ID 1 ~
5
Apply
Cancel
154
DESCRIPTION
Select the checkbox to enable the Device to provide public IP addresses by DHCP server.
Select the checkbox to enable the ARP (Address Resolution Protocol) proxy.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Enter the STB's vendor ID.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
VMG1312-B Series User's Guide