Before You Begin; The Broadband Screen - ZyXEL Communications VMG1312-B Series User Manual

Vmg1312-b series wireless n vdsl2 4-port gateway with usb
Hide thumbs Also See for VMG1312-B Series:
Table of Contents

Advertisement

Chapter 6 Broadband
IPv6 Subnet Masking
Both an IPv6 address and IPv6 subnet mask compose of 128-bit binary digits, which are divided
into eight 16-bit blocks and written in hexadecimal notation. Hexadecimal uses four bits for each
character (1 ~ 10, A ~ F). Each block's 16 bits are then represented by four hexadecimal
characters. For example, FFFF:FFFF:FFFF:FFFF:FC00:0000:0000:0000.

6.1.3 Before You Begin

You need to know your Internet access settings such as encapsulation and WAN IP address. Get this
information from your ISP.

6.2 The Broadband Screen

Use this screen to change your Device's Internet access settings. Click Network Setting >
Broadband from the menu. The summary table shows you the configured WAN services
(connections) on the Device.
Figure 19 Network Setting > Broadband
The following table describes the labels in this screen.
Table 7 Network Setting > Broadband
LABEL
Add new WAN
Interface
#
Name
Type
Mode
Encapsulation
802.1p
802.1q
IGMP Proxy
NAT
Default
Gateway
IPv6
84
DESCRIPTION
Click this button to create a new connection.
This is the index number of the entry.
This is the service name of the connection.
This shows whether it is an ATM, PTM, or Ethernet connection.
This shows whether the connection is in routing or bridge mode.
This is the method of encapsulation used by this connection.
This indicates the 802.1p priority level assigned to traffic sent through this connection. This
displays N/A when there is no priority level assigned.
This indicates the VLAN ID number assigned to traffic sent through this connection. This
displays N/A when there is no VLAN ID number assigned.
This shows whether the Device act as an IGMP proxy on this connection.
This shows whether NAT is activated or not for this connection.
This shows whether the Device use the WAN interface of this connection as the system
default gateway.
This shows whether IPv6 is activated or not for this connection. IPv6 is not available when
the connection uses the bridging service.
VMG1312-B Series User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vmg1312-b30aVmg1312-b10a

Table of Contents