ZyXEL Communications VMG1312-B Series User Manual page 264

Chapter 28 TR-069 Client
The following table describes the fields in this screen.
Table 100 Maintenance > TR-069 Client
LABEL
Inform
Inform Interval
ACS URL
ACS User Name Enter the TR-069 user name for authentication with the auto-configuration server.
ACS Password
WAN Interface
used by TR-069
client
Display SOAP
messages on
serial console
Connection
Request
Authentication
Connection
Request User
Name
Connection
Request
Password
Connection
Request URL
Local certificate
used by TR-069
client
Apply
Cancel
264
DESCRIPTION
Select Enable for the Device to send periodic inform via TR-069 on the WAN. Otherwise,
select Disable.
Enter the time interval (in seconds) at which the Device sends information to the auto-
configuration server.
Enter the URL or IP address of the auto-configuration server.
Enter the TR-069 password for authentication with the auto-configuration server.
Select a WAN interface through which the TR-069 traffic passes.
If you select Any_WAN, you should also select the pre-configured WAN connection(s).
Select Enable to show the SOAP messages on the console.
Select this option to enable authentication when there is a connection request from the ACS.
Enter the connection request user name.
When the ACS makes a connection request to the Device, this user name is used to
authenticate the ACS.
Enter the connection request password.
When the ACS makes a connection request to the Device, this password is used to
authenticate the ACS.
This shows the connection request URL.
The ACS can use this URL to make a connection request to the Device.
You can choose a local certificate used by TR-069 client. The local certificate should be
imported in the Security > Certificates > Local Certificates screen.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
VMG1312-B Series User's Guide