Table of Contents
Advertisement
Chapter 8 Quality of Service (QoS)
Table 31 Class Setup: Add/Edit (continued)
LABEL
Port Range
Exclude
Others
IP Protocol
IP Packet
Length
DSCP
Exclude
Apply
Back
8.5 The QoS Monitor Screen
To view the LTE Device's QoS packet statistics, click Network Setting > QoS > Monitor. The
screen appears as shown.
Figure 47 Network Setting > QoS > Monitor
84
DESCRIPTION
If you select TCP or UDP in the IP Protocol field, select the check box and enter the port
number(s) of the source.
Select this option to exclude the packets that match the specified criteria from this
classifier.
This field is available only when you select IP in the Ether Type field.
Select this option and select the protocol (service type) from TCP or UDP. If you select
User defined, enter the protocol (service type) number.
This field is available only when you select IP in the Ether Type field.
Select this option and enter the minimum and maximum packet length (from 46 to 1504) in
the fields provided.
This field is available only when you select IP in the Ether Type field.
Select this option and specify a DSCP (DiffServ Code Point) number between 0 and 63 in
the field provided.
Select this option to exclude the packets that match the specified criteria from this
classifier.
Click Apply to save your changes.
Click Back to return to the previous screen without saving.
LTE6101 User's Guide
Advertisement
Table of Contents
