Schwinn Journey 2.0 Recumbent Bike Assembly Manual page 30

9. T he Console will go to the Power-Up Mode screen with the user selected.
Reset a User Profile
1. F rom the Power-Up Mode screen, push the Increase() or Decrease() buttons to select one of the User Profiles.
2. P ush the OK button to select the User Profile.
3. T he Console display shows the current User Profile name and the EDIT prompt. Push the Increase() or Decrease()
buttons to change the prompt.
Note: To exit the Edit User Profile option, push the PAUSE/END button and the console will go back to the Power-Up
Mode screen.
4. T he Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User Profile
option.
5. The Console will now confirm the request to reset the User profile (the default selection is 'NO'). Push the Increase() or
Decrease() buttons to adjust the selection.
6. P ush OK to make your selection.
7. The Console will go to the Power-Up Mode screen.
Changing Resistance Levels
Push the Resistance Level Increase() or Decrease() buttons to change the resistance level at any time in a workout
program. To rapidly change the resistance level, push the desired Resistance Level Quick Button. The Console will adjust to
the selected resistance level of the quick button.
Profile Programs
These programs automate different resistance and workout levels. The Profile Programs are organized into Categories (Fun
Rides, Mountains, and Challenges).
Note: O nce a User views all the Categories, they will be expanded to display the Programs within each of the Catego-
ries.
ndary Case 6: Profile Programs Secondary Case 6: Profile Programs
FUN RIDES
Rolling Hills Rolling Hills
Easy Tour Easy Tour
Pike's Peak
Pyramids
30
Uphill Finish
Hr
Rolling Hills Ride in the Park
Stream Crossing
Pike's Peak Mount Hood
Summit Pass
Uphill Finish Cross-Training
Ride in the Park Ride in the Park Easy Tour
Mount Hood Pyramids
Cross-Training Interval
Easy Tour Stream Crossing
Pyramids Summit Pass
Interval Stairs