Schwinn 230 Recumbent Bike Assembly Manual page 18

Step 10 Install Handlebar
Parts:
• Handlebar (Ref B)
• Washer (Ref I-3)
• Screw M8x16 (Ref I-5)
10-1 Tuck the Computer Wires into the Mast to allow insertion of
the Handlebar .
10-2 Slide the Handlebar (B) into the Mast and secure with the
Console M8x16 Screw (I-5) and Washer (I-3) . (Figure A)
10-3 Pull the Computer Wires back up through the Handlebar as
shown. (Figure B)
B
I-5
Figure A
16
I-3
Figure B