Schwinn 230 Recumbent Bike Assembly Manual page 13

Step 5 Install Seat back
Parts:
• Seat Bottom (Ref. L-1)
• Four M8x1x45 Screws (Ref. I-7)
• Four 8x16x2 Washers (Ref. I-3)
Tools:
• Supplied Allen Wrench
5-1 Align the Seat Back (L-1) with the Seat Frame.
5-2 Install and completely tighten the hardware.
Note: There are two sets of holes in the Seat Back.
You may use the upper or lower set of holes to find the
the most comfortable position.
L-1
I-3
I-7
11