Schwinn 212 Parts List, Full Size Hardware Chart, Product Illustration, Assembly Instructions
Hide thumbs
Also See for 212:
- Owner's manual (34 pages) ,
- Owner's manual (34 pages) ,
- Service manual (12 pages)
Related Manuals for Schwinn 212
Summary of Contents for Schwinn 212
- Page 1 212 Schwinn Recumbent Exercise Bike ® Parts List Full Size Hardware Chart Product Illustration Assembly Instructions...
-
Page 2: Fitness Safeguards And Warnings
FITNESS SAFEGUARDS AND WARNINGS Before starting any exercise program, consult with your physician or health professional. He or she can help establish the correct exercise frequency, intensity (target heart rate zone) and time appropriate for your particular age and condition. The following 3 warnings listed below are also located on the computer console mast of the exercise bike. - Page 3 • A flat area of 5’ x 7’ is suggested to assemble and properly use the 212 exercise bike. • You will need the following tools to complete the assembly:...
-
Page 4: Parts List
Parts List Check Quantity Description Reference # Computer Handlebars Computer Screws Handlebar Post Allen Bolt 8x1.25x16L Wavy Washer Upper HR Wire Upper Computer Wire Lower Computer Wire Lower HR Wire Front Stabilizer Flathead Screw 8x16L Main Frame Pedals Flat Washer Seat Rail Post Rear Stabilizer Seat Rail... -
Page 5: Hardware Chart
? 8* ? 16*2T Stage#8 Screwdriver Allen Key Allen Bolt M8xP1.25x16mm Note: Please verify you have all correct parts and quantities before assembling unit. If you are missing items, are short quantities, or have damaged components, please contact Schwinn at 1.800.864.1270. - Page 6 212 Assembly Drawing with Reference Numbers...
-
Page 7: Replacement Parts List
Replacement Parts List Reference # Description Part # Computer 18143 Handlebars 18200 Computer Screws 18094 Handlebar Post 18196 Allen Bolt 8x1.25x16L 18001 Wavy Washer 18098 Upper HR Wire 18086 Upper Computer Wire 18085 Deleted: 18064 Lower HR Wire Front Stabilizer Deleted: 18189 Flat head Screw 8x16L 18136... - Page 8 Instructions IMPORTANT!: To ensure ease of assembly please verify the size and quantity of all the required assembly hardware and parts with the enclosed parts list and full size hardware chart. Each step of the assembly process has been broken down into 6 easy-to-follow stages.
- Page 9 Step 3: Attach SEAT (#23) to SEAT FRAME (#26) with 4 ALLEN BOLTS 45mm (#25) and 4 WASHERS (#15). Tighten Bolts. Step 4: Attach SEAT BACK (#27) to SEAT FRAME (#26) with 4 ALLEN BOLTS 45mm (#25) and 4 WASHERS (#15). Tighten Bolts. Note: Finished seat should look like picture below:...
-
Page 10: Seat Assembly
Assembly Stage #2 Attach Rear Stabilizer and Seat Rail to Seat Assembly Assembly hardware required: (4) M8 Allen Bolts 16mm (item #5) (4) Flat Washers Ø8 * Ø16 * 2T (item#15) (2) Flat Head Screws (item #12) Step 5: Attach the REAR STABILIZER (#17) to the SEAT RAIL POST (#16) with 2 FLAT HEAD SCREWS (#12). - Page 11 Assembly Stage #3 Attach Front Stabilizer Tube and Pedals to Main Unit Assembly Hardware Required: (2) Flat Head Screws (item #12) Step 8: Attach FRONT STABILIZER TUBE (#11) to the MAIN UNIT (#13) with 2 FLAT HEAD SCREWS (#12). Tighten Bolts with provided wrench. Step 9: Attach RIGHT PEDAL (#14) to the right crank arm on the MAIN UNIT (#31).
- Page 12 Assembly Stage #4 Attach Seat Rail to Main Unit Assembly Hardware Required: (3) Allen Bolts 16 mm long (item #5) (3) Flat Washers (item #15) Step 10: Attach the SEAT RAIL HR WIRE (#19) to the LOWER HR WIRE (#10). Carefully slide the seat rail assembly onto the receiver on the MAIN UNIT (#13).
- Page 13 Assembly Stage #5 Attach Handlebar Assembly and Run Cabling Through Handlebar Post Assembly Hardware Required: NONE Step 11: Slide the HANDLEBAR ASSEMBLY (#2) into the receiver on the HANDLEBAR POST (#4). Slide the threaded post into the slider tube and attach the HANDLEBAR ASSEMBLY SLIDER TUBE (#2) and the HANDLEBAR POST (#4) by threading the ADJUSTMENT KNOB (#21) and the SMALL FLAT WASHER (#22) into the threaded post.
- Page 14 Assembly Stage #6 Attach Console Mast to Main Unit Assembly Hardware Required: (4) Allen Bolts 16 mm long (item #5) (4) Curved Washers (item #6)
- Page 15 That’s it! You’re finished and now you can begin to reach your fitness goals! Please reference the Owner’s Manual for information regarding computer operation, product maintenance, warranty information, and general fitness and exercise guidelines. Schwinn Customer Service 1.800.864.1270...
- Page 16 Troubleshooting the Schwinn 212 Recumbent Exercise Bike TIP: Use assembly diagram(s) as reference when troubleshooting unit. PROBLEM: Computer will not start, function, or is blank… (SOLUTION): 1. Ensure the batteries the unit is plugged into a 110v outlet. 2. Check the wiring connections and connector orientation made to the computer.