Step 9 Install Handlebar Mast - Schwinn 230 Recumbent Bike Assembly Manual

Step 9 Install Handlebar Mast

Parts:
• Handlebar Mast (Ref C)
Tools:
• Supplied Allen Wrench
9-1 Remove the four Allen Bolts (C-1) and Curved Washers (C-2)
from the frame .
9-2 Connect the Upper and Lower Computer Wires and Heart Rate
Wires. (Detail A)
9-3 Insert the Handlebar Mast (C) into the main unit.
9-4 Re-install the four Allen Bolts and Curved Washers and
completely tighten.
Detail A
C
C-2
C-1
15