What Does Each Message Mean - Minolta CF 911 P Operator's Manual

7. What Does Each Message Mean?

What Does Each Message Mean?
Message
"Alert"
"Service Code"
"Check toner hopper"
"Door open or xxxx is not
attached"
"Fuser oil nearly empty"
"Load xx in yyyy tray"
Max. # for 2-sided printings is 1. You have entered 2 or more for
Max. # of sets for sorting is 10.
"Near trouble at pxx."
"No fuser oil"
"No staple"
"No xxxx toner "
"Remove papers from output
bin."
"Toner waste bottle not set"
"Tray trouble/mid/low."
"Waste toner full"
Cause
The unit malfunctioned and is
unable to produce prints.
The toner hopper is not set
securely and the unit is unable to
produce prints.
A unit door is left open or an
option is not attached properly
and the unit is unable to produce
prints.
The Fuser Oil is running out.
The currently selected Tray has
run out of paper.
the number of printings to be
made in a 2-sided print mode.
You have entered 11 or more for
the number of printings to be
made in a sort/sort and staple
mode.
A malfunction occurred in the
image stabilization control or
other function.
The Fuser Oil needs to be replen-
ished and the unit is unable to
produce prints.
The staples have run out.
Toner of the displayed color has
run out and the unit is unable to
produce prints.
Paper that was stapled or that was
not stapled remains in the Sorter.
The current toner bottle is not set
securely and the unit is unable to
produce prints.
Either the top, middle or bottom
tray cannot be used.
The waste Toner Collecting Bot-
tle is full and the unit is unable to
produce prints.
Action
Press the M key. Call and inform
your Technical Representative of
the trouble code message on the
display.
Check the toner hopper.
p. 6-4
Close the door or cover and attach
the option properly.
Call your technical representative.
Load the Tray with paper.
p. 6-2
Reener 1 for the number of
printings to be made.
Reenter 10 or less for the number
of printings to be made.
Inform the technical representa-
tive of the page number that is
displayed.
Call your technical representative.
Replace the Staple Cartridge with
a new one. p. 6-6
Replenish toner. p. 6-4
Remove the paper from the
Sorter/Staple Sorter.
Call your technical representative.
Check the displayed tray condi-
tion and then open and close the
front door.
Call your technical representative.
6-15