Rule Setup Menu - Bosch VG5 600 Series User Manual

20 en | On-Screen Display Menu Navigation
2.8

Rule Setup Menu

The Rule Setup Menu shows the status of the rules and lets you add new rules or modify an
existing rule. The default setting is Empty.
NOTICE!
You can program a total of twelve rules. You must define the inputs and outputs before you
program a rule. See Section 2.7 Alarm I/O Setup, page 18, to configure alarm inputs and
outputs.
Exit...
1. Rule 1
2. Rule 2
3. Rule 3
4. Rule 4
5. Rule 5
6. Rule 6
7. Rule 7
8. Rule 8
9. Rule 9
10. Rule 10
11. Rule 11
12. Rule 12
4. Rule 4
Rule Setup Menu Choices
Menu Description
Exit Saves and exits the menu.
Rule 1-12 Displays the status of a rule
on the right side of the
menu. There are four (4)
possible rule statuses.
Selecting a Rule number provides access to its configuration menu. The Rule # Menu allows
you to configure a rule from previously defined alarm inputs and outputs. Once an alarm is
configured with valid inputs and outputs, it can be turned on or off (enabled or disabled)
through its configuration menu.
F.01U.270.005 | 2.0 | 2012.06
Rule Setup...
Enabled
Disabled
Invalid
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Focus / Iris: Select
Sub-menu / Description
Enabled: The rule inputs and outputs are properly
defined and the rule is turned on.
Disabled: The rule inputs and outputs are defined but the
rule is turned off.
Invalid: The rule has a missing or invalid input or output.
Empty: The rule has no inputs or outputs defined.
Rule 1
Exit...
Enabled
Input:
NONE
NONE
NONE
Output:
OSD
Shot 2
Alarm Relay
NONE
Right / Left: Select Period Time
Focus / Iris: Select Type
User Manual
AutoDome 600 Series Analog PTZ Camera
YES
2 sec
Default
Setting
Empty
Bosch Security Systems, Inc.