Table of Contents
Advertisement
AutoDome 600 Series Analog PTZ Camera
3.3
Specifying a Shot or a Sector Title
The AutoDome provides an alphanumeric character palette used to specify a title for a shot
(scene) or for a sector (zone).
1.
2.
3.
4.
5.
6.
3.4
Configuring Preposition Tours
A Preposition Tour automatically moves the camera through a series of preset or saved shots.
The VG5 Autodome has one (1) standard preset tour and one (1) customized preset tour. Tour
1 is a standard tour that moves the camera through a series of shots in the sequence they
were set. Tour 2 is a custom tour that allows you to change the sequence of shots in the tour
by inserting and deleting scenes.
To start Preposition Tour 1:
1.
2.
To stop a Preposition Tour:
To add or remove scenes to Preposition Tour 1:
1.
2.
To start custom Preposition Tour 2:
To edit a custom Preposition Tour 2:
1.
2.
To change the dwell period of a tour:
1.
2.
Bosch Security Systems, Inc.
To specify a title, navigate to the shot or scene:
–
for a shot: set a new shot or view a stored shot then press ON-62-ENTER.
–
for a scene: move the AutoDome to the scene (zone) then press ON-63-ENTER.
Use the joystick to move the cursor to highlight a character.
Press Focus/Iris to select the character.
Continue to select characters (up to 20) until you have created the title.
To clear a character from the title:
a.
Use the joystick to highlight the Clear OR Position Character prompt.
b.
Move the joystick left or right until the cursor is below the title character you need to
clear.
c.
Press Focus/Iris to clear the character.
d.
Move the joystick up to bring the cursor back into the character palette.
To save the title:
a.
Use the joystick to highlight the Exit prompt.
b.
Press Focus/Iris to save the title.
Set a series of preset shots in the order that you want the AutoDome to cycle through.
Press ON-8-ENTER to start the tour. The tour then cycles through the series of shots until
it is stopped.
Press OFF-8-ENTER or move the joystick to stop either type of tour.
Press SHOT-900-ENTER to access the Add/Remove Scenes Menu.
Use the Focus/Iris buttons to add or remove the selected scene from the tour.
Press ON-7-ENTER to start a tour. The tour cycles through the series of shots in the order
they were defined until it is stopped.
Press SET-900-ENTER to access the Add/Remove Menu.
Press the Focus/Iris buttons to add or remove the selected scene.
Press ON-15-ENTER to access the Tour Period Menu.
Select the tour (Tour 1 or Tour 2) and follow the on-screen instructions.
Common AutoDome User Commands (unlocked) | en
User Manual
27
F.01U.270.005 | 2.0 | 2012.06
Hide quick links:
Advertisement
Table of Contents
