Point Mode; Table 6: Recommended Mode Values - Bosch D8125INV Operation And Installation Manual

3.6.1.1 Point Mode

The Point Mode setting determines whether:
the transmitter is a burg point or fire point,
Normally Open or Normally Closed contacts are used,
the Internal and/or external contacts are used, and
end of line resistors are used on the external contacts.
This applies to RF Transmitters that have external contacts and/or internal magnetic contacts (see Table 7).
Inovonics
Transmitter
FA210 Reduced
Size Universal
FA210W
FA250 High Power
Universal
FA210BN
FA210WBN
FA210W &
FA210WBN
Reduced Size
"Wide-Gap"
Universal
Inovonics Transmitter
FA113 Keyfob
(see Section 3.6.1.6 Programming the FA113 Keyfob, p. 22)
FA202 Photoelectric Smoke Detector
FA203S/D Necklace Pendant
FA204 Pendant
FA205S/FA205D Belt Clip/Loop
FA206 ALL
FA207 Glassbreak
FA209 Billtrap
FA216L/H Low Temperature/High Temperature
FA223S/D Single/Double Button Water Resistant Pendant
FA570 High Power Indoor Repeater
FA575 High Power Outdoor Repeater
© 2005 Bosch Security Systems
External Contact
Mode
Normally Normally
Open Closed
1
2
3
4
6
7
8
9
10
11
5
12

Table 6: Recommended Mode Values

D8125INV Operation and Installation Guide
End of Line Resistor
(use 2.2 K ¼ Watt)
Page 17
D8125INV
Installation
Internal Fire
Contact Point
Mode
4
9
4
4
4
2
4
4
4
4
4
49690E