Table of Contents
Advertisement
6.2.11 Cyclic Sampling
This mode is for logging data at regular intervals such as 1, 10, 15, 30, etc.
minutes, for example.
1) Request Barometric Correction from the OBS-5+ menu. Be sure to do
2) Open the Data Window with the View pull-down menu.
3) Activate the lookup table for your survey area with
4) Click Cyclic Sampling and select sensors, statistics, depth units (meters or
5) Select Interval, Duration, Rate, and Power level; see recommendations
6) Click Start Sampling to begin logging data and watch a few lines as they
this while the OBS-5+ is at the surface (see Section 6.2.10, Surveying ).
activate buttons (Step 3, Section 6.2.10, Surveying).
feet), water temperature, and salinity.
in Section 6.2.9, Sampling Modes and Terms.
are displayed in the data window to be sure the schedule is what you want.
Unplug test cable; install dummy plug and locking sleeve. The instrument
is ready for deployment.
OBS-5+ System
and
17
Advertisement
Table of Contents
