Testing Sensors - Campbell OBS-5+ Operator's Manual

OBS-5+ System

6.2.5 Testing Sensors

12
adjustment takes two seconds. If your PC is set to the wrong rate for some
reason, use the check box to select ONLY change host computer port. Then
click Apply and the OBS Settings button.
If you get the OBS-5+ information box, the baud rate of the unit is
synchronized with your PC. If you don't get an information box, repeat the
above procedure until communication is established.
1) Before daily operations and deployments, verify that the instrument works
by clicking Open Plot, and then clicking
sensors and click Start Survey. An example plot of data is shown below.
Survey. Select all