OBS-5+ System
1.
Introduction
2.
Cautionary Statements
3.
Initial Inspection
3.1
Ships With
The manual describes the features of the OBS-5+
surveys and battery-powered, internal-storage operations. Using backscatter
from a 780 nm laser diode and a patented dual-detection system (U.S. Patent
Number 5,796,481), a calibrated OBS-5+ measures suspended sediment
concentrations, suspended solids concentration (SSC), as large as 200 g L
which is about 10 times higher than standard OBS technology.
Before installing the OBS-5+, please study:
•
Section 2, Cautionary Statements
•
Section 3, Initial Inspection
•
Although the OBS-5+ is rugged, it should be handled as a precision
scientific instrument.
•
Maximum depth for the OBS-5+ is limited by the installed pressure
sensor. If the maximum depths are exceeded, the pressure sensor will
rupture and the housing will flood. See Section 6.1, Instrument Setup, for
more information.
•
Always orient the unit so that the OBS-5+ sensor "looks" into water clear
of reflective surfaces.
•
Pad the end caps that contact metal with electrical tape, neoprene, or
expanded polyethylene tubes.
•
Never mount the instrument by its end caps or attach anything to them.
This could a cause a leak.
•
Always put the OBS-5+ in sleep mode when it will not be used for a while
to conserve battery capacity (see Section 6.2.13, Shutdown).
•
Upon receipt of the OBS-5+, inspect the packaging and contents for
damage. File damage claims with the shipping company.
•
Check this information against the shipping documents to ensure the
correct product is received (see Section 3.1, Ships With).
21304 Accessory Kit
20919 Software Support CD
ResourceDVD
®
, as well as its use for
–1
,
1