Table of Contents
Advertisement
OBS-5+ System
6.2.2 Running the OBS-5+ Utility
10
data with a PC or uploading data from the OBS-5+, 5) importing data into a
spreadsheet, and 6) plotting data with OBS-5+ Utility.
1) Set PC to the time standard for your project.
2) Select the OBS-5+ program to start the OBS-5+ Utility and open the Data
Window and Toolbar with the View pull-down menu.
3) The OBS-5+ Utility will create a new data log file and prompt you to
accept the name (see FIGURE 6-3). Files are automatically named with
Greenwich Date and Time as follows: OBS5+_20010808_172433.log. Or
you can create your own file name and destination by choosing No (see
FIGURE 6-4). Data received from the OBS-5+ while it is connected to the
PC will be stored in this file.
FIGURE 6-3. New data log prompt
FIGURE 6-4. Designating your own file name and destination
4) Connect the OBS-5+ to a PC with the test cable (FIGURE 6-1).
5) Click
Connect/Disconnect to get a green light and synchronize the
OBS-5+ clock with your PC by clicking
.
Advertisement
Table of Contents
