Remote Access - GE 2-9868 User Manual

R A
EMOTE
You can access your answerer from any touch-tone phone
by entering your 3-digit security code (the default security
code is 123, but you can change it.) Be aware that remote
functions do not work with rotary or push-button pulse-
dialing phones. You can cut out the wallet-size remote card
on page 19 so you know the touch-tone commands when
you're picking up messages from another location.
To access your answerer:
1. Call your telephone number.
2. After you hear the beep that follows the greeting, enter
your 3-digit security code. To bypass the greeting, you
can enter your 3-digit security code any time while the
greeting is playing.
3. The unit plays the remote menu after the correct
security code has been entered. Menu selections can
be made while the menu is playing.
NOTE: The unit answers on the 10th ring when it
is turned off or the memory is full. To access the
answerer, enter the 3-digit security code after the
beep. If memory is full, play messages and erase
some of them to restore memory. If the answerer is
off, press 2 to turn it on.
NOTE: After the unit plays the remote menu, it will
wait 10 seconds for a command, then disconnect.
CCESS
13