You can access your answerer from any touch-tone telephone by entering your
3-digit security code (the default security code is 123 – see Setting Security Code).
The remote function will not work with rotary or pulse dialling telephones. Also some
dialling telephones only output tones for a fraction of a second. If you experience
difficulty with remote access operation, try another telephone, or use a separate tone
Cut out the wallet-size remote access instruction card on page 11 for reference
during remote access.
To access your answerer remotely:
1. Call your telephone number.
2. After you hear the beep that follows the greeting, enter your 3-digit security
code. To by-pass the greeting, you can enter your security code any time while
the greeting is playing.
3. The unit plays the remote menu after the correct security code has been
entered. Menu selection can be made while the menu is playing.
The unit answers on the 10
To access the answerer, enter the 3-digit security code after the beeps. If the
memory is full, play your messages and erase some of them to restore memory. If
the answerer is off press 2 to turn it on.
After the unit plays the remote menu, it will wait 10 seconds for a command. If no
command is entered, the unit disconnects.
General Product Care
You can clean your answering machine with a damp cloth. Do not use abrasives,
spray polish or solvents, which may cause permanent damage not covered by
Do not expose the product to extreme temperatures such as a hot radiator or
ring if the unit is turned off or the memory is full.