Dolby Digital Audio - Strong SRT 5006 User Manual

Dolby Digital Audio

If you have a Dolby Digital Decoder Amplifier, you can
connect to the amplifier by Coaxial cable (purchased
separately). This connection will provide for Dolby
Digital output when broadcast.
Connector 4 is the Digital audio output.
To 'Enable' Dolby Digital to be heard when transmitted
within the broadcast stream, you will need to select
Dolby Digital In the TV Set Up Menu, followed by
selection of the Audio button on the remote control.
• Push the MENU button, and Welcome banner will appear.
• Push the BLUE button for Main Menu.
• Banner at the top of the TV screen will be viewed listing:
Installation / Set Up / Information.
• Scroll to & select Set Up by pushing OK button
and 4 topics will appear.
• Scroll down to Setting & push OK, and 6 topics will
be viewed.
• Scroll down to TV Set Up & Push OK.
• TV Set up banner will appear listing 10 topics.
• Scroll down to Audio and select Dolby Digital.
• Scroll down and select Dolby Symbol and Push OK.
• Push OK.
• Push Exit 3 times to return to normal TV broadcast.
IMPORTANT: If broadcaster is not transmitting in
Dolby Digital at that time, you will not be able to view
or select the Dolby symbol in the menu
18