Power On & Auto Scan
• With the unit connected to the mains power, switch
on the mains power and the units power On/Off
switch, a RED standby light will be viewed on the
display, including 4 horizontal lines.
• Push the RED power button on the remote control
and a Welcome banner will appear listing 4 topics.
• On the remote control, push the Green button for
Scan All Channels.
• Scan All Channels banner will appear
prompting Yes / No
• Using R & L Scroll buttons, select Yes, which will
then be highlighted
• Push OK button on the remote control and unit will
now begin to scan and lock in all available
frequencies in your area.
This will take approximately one minute.
14