Adjustment procedure for Dolby Surround
Make the adjustments described below in order to reproduce Dolby Digital and DTS sound with greater
accuracy.
Adjustment procedure
Speaker setup (page 38)
1
(Turning the speakers to be used on and off and setting their response)
Adjusting the speaker levels (page 40)
2
(Adjusting the signal output level to the various speakers)
Center/rear speaker time correction (pages 42 and 44)
3
(Adjusting the signal output time compensation (timing) of the various speakers)
Adjusting the acoustic image (page 46)
4
(Adjusting the acoustic image to achieve a sound as if the center speaker were directly
in front of the listener)
Mixing bass sound to the rear channel (page 48)
5
(Achieving smooth sound in the rear seat by mixing the front audio signals with the
rear speaker signals)
Achieving powerful high volume sound (page 50)
6
(Achieving energetic sound with even greater power, like the sound in a movie theater)
Storing settings in the memory (page 52)
7
(Storing all the settings and adjustments made on the PXA-H900 (not only the above
settings/adjusts) in the memory)
Note: In case of combining the Automatic adjustments etc.
We recommend to make the Automatic adjustments before the Dolby Surround adjustments.
37
-
EN