Table of Contents
Advertisement
Setting Automatic Background Textures
The background texture will automatically change each time the
ignition key is turned off and turned back on again.
Setting item: AUTO BACKGROUND
Setting content: OFF / ON
OFF:
Turn off the Auto Background Texture Scroll mode.
ON:
Turn on the Auto Background Texture Scroll mode.
The background textures will scroll when the ignition
key is turned off once and turned back on again as
follows:
MODE1
MODE2
• Wallpapers downloaded from "Downloading the BACKGROUND
data" (page 43) are recalled.
Switching the Font Background Colour
You can choose from 5 different colours for the font background.
Setting item: BASE COLOR
Setting contents: MODE 1 to MODE 5
Adjusting the Touch Panel
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: SCREEN ALIGNMENT
Setting content:
/ RESET
1 Touch [
] of SCREEN ALIGNMENT.
The adjustment screen appears.
2 Accurately touch the
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the
corner of the screen.
This completes adjustment, and returns to the DISPLAY
setup mode screen.
• If you have touched a location other than the
[RESET] to restore the adjustment screen to the initial setting.
• If you touch [RETURN] on the adjustment screen, no adjustment is
done and the DISPLAY setup screen is restored.
mark provided in the lower left
mark provided in the upper right
mark, touch
VISUAL EQ™
Visual EQ Setting Operation
The following steps 1 to 4 are common operations to each
"Setting item" of VISUAL EQ setting. Refer to each section for
details
1
After steps 1 and 2 in "Display Setup Operation"
(page 40) have been performed, touch [
VISUAL EQ.
VISUAL EQ screen appears.
2
Select a desired setting item by touching [ ] or [ ].
Setting items:
VISUAL EQ*
BRIGHT
COLOR*
USER MEMORY*
* The setting is available in the visual source mode. (except navigation
screen)
3
Change the setting on the selected item by touching
its [ ] or [ ].
4
Touch [RETURN] to return to the previous screen.
Selecting the VISUAL EQ Mode (Maker's
setting)
You can select a mode suitable for the subject image.
Setting item: VISUAL EQ
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
OFF (FLAT): Initial Setting
NIGHT M.:
Suitable for movies in which dark scenes
frequently appear.
SOFT:
Suitable for CGs and animated films.
SHARP:
Suitable for old movies where images are not
clearly shown.
CONTRAST: Suitable for recent movies.
P-1:
Recalls the VISUAL EQ mode being stored on
preset No.P-1 from "Storing VISUAL EQ"
(page 42).
P-2:
Recalls the VISUAL EQ mode being saved on
preset No.P-2 from "Storing VISUAL EQ"
(page 42).
• To return to the initial setting, after selecting any one of the setting
contents (NIGHT M. to CONTRAST) and adjusting a desired
brightness, picture tint, etc., set this function to OFF.
• If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (NIGHT M. to CONTRAST),
"CUSTOM" is displayed.
] of
TINT*
CONTRAST
SHARP*
41
-EN
Advertisement
Table of Contents
