NEC Express5800 120Lh User Manual page 80

4-14 Configuring Your Server
Server
Option
System
Management
Console
Redirection
Assert NMI on
PERR
Assert NMI on
SERR
Post Error Pause
AC LINK
IMPORTANT:
Power Supply), select [Server] - [AC Link] - [Power On].
The table below shows the operation when the AC power to the server is turn off once and then on
again, depending on the setting of "AC LINK."
System status before AC power off
Operating
Aborting (DC power being off also)
Forced shutdown
* Press the power switch continuously for four seconds or longer. This forcibly turns off the
power.
Parameter Description
– System Management submenu is
displayed.
– Console Redirection submenu is
displayed.
Disabled Indicates whether PCI PERR is
[Enabled] supported or not.
Disabled Indicates whether PCI SERR is
[Enabled] supported or not.
Disabled Indicates whether POST is aborted once
[Enabled] at the end of POST if an error occurs
during the execution of POST.
Stay Off Indicates the AC LINK function. Shows
[Last State] the state of the power of the server.
Power On
To power on the server from the UPS (Uninterruptible
Setting of AC LINK
Stay Off Last State
Off On
Off Off
Off Off
Your Setting
[ ]: Factory-set
Power On
On
On
On