Advanced Configuration - NEC Express5800 120Lh User Manual

Advanced Configuration

Move the cursor onto "Advanced Configuration" and press Enter to display the submenu.
The following table lists submenu items, available parameter, and descriptions.
Submenu item
Reset SCSI Bus at
IC Initialization
Display <Ctrl><A>
Message During
BIOS Initialization
Extended Int 13
Translation for DOS
Drives > 1 GByte
POST Display Mode
SCSI Controller Int
13 Support
Domain Validation
Support Removable
Disks Under Int 13
as Fixed Disks
BIOS Support for
Bootable CD-ROM
Parameter Description
[Enabled] Select "Enabled".
Disabled
[Enabled] Select "Enabled".
Disabled
[Enabled] Select "Enabled".
Disabled
[Verbose] Select "Verbose".
Silent
Diagnostic
[Enabled] Enable or disable SCSI BIOS.
Disabled: Select "Enabled" for most cases other than the
NOT Scan following:
Disabled: To boot the OS from a hard disk connected to
•
scan bus any other controller than SCSI controller. (If
the controller has no hard disks connected,
there is no problem.)
• BIOS of the SCSI controller may be disabled to
reserve an area in the expansion ROM space
if the controller has no hard disks connected.
[Enabled] Select "Enabled".
Disabled
Boot Only AIC-79xx BIOS automatically controls the
All Disks removable disks.
[Disabled]
[Enabled] Select "Enabled".
Disabled
Configuring Your Server 4-21
[ ]: Factory-set