Table of Contents
Advertisement
– Embedded Video Controller submenu
Option
Onboard VGA
Control
Option
PCI Slot 1 Option
ROM – PCI Slot 6
Option ROM
Parameter
Description
Disabled
If Disabled, the BIOS will hold the
[Enabled]
embedded chip in reset. In this
configuration, the controller hardware is
completely disabled, and will be invisible to
the PnP operating systems.
Parameter
Description
[Enabled]
Enable option ROM scan of the selected
device.
Disabled
When the graphics accelerator board is
installed or the disk array controller or SCSI
controller boards to be installed are
connected to the hard disk in which OS is
installed, set this item to "Enabled." When
the LAN controller board with installation of
the option ROM BIOS is used but the board
does not provide network booting, set this
item to "Disabled."
Configuring Your Server 4-9
Your Setting
[
]: Factory-set
Your Setting
[
]: Factory-set
Advertisement
Table of Contents
Troubleshooting
