Remote Control - Ikegami MLW-2625C Instruction Manual

5.11 Remote control

MENU
Used to display the menu.
PIP SEL
Used to switch between the main and sub PIP.
SWAP
Used to switch between the main and sub images.
Used to put the contrast, brightness and other settings
in memory and to exit.
INPUT1
Used to select the main input signal.
INPUT2
Used to select the sub input signal.
BRIGHT
Used to adjust the brightness level with BRIGHT
selected.
CONT
Used to select and preset the OSD menu and to adjust
the contrast level with CONT selected.
17
5. Operation
MONITOR SELECT
0 1 2 3
CALL 4 5 6
END 7 8 9
MENU PIP SEL SWAP
EXIT
INPUT1 INPUT2
BRIGHT CONT
REMOTE CONTROL
MRU-10