Table of Contents
Advertisement
• IP Mode:
5.9 Color Adjustment Screen
This screen is used to adjust the colors and to set the signal formats. The colors are adjusted
in the User mode. The color temperatures are fixed at 6500K and 9300K, not adjustable.
The R, G and B colors are adjusted individually by the gain levels.
Display screen
Color adjustment screen description
• Color Mode:
• R. Gain:
• G. Gain:
• B. Gain:
• Gamma Control:
• Signal Set Component: Used to set the format of each input signal. RGB or YPbPr
Used to select the interlaced-to-progressive conversion mode.
Still:
Usually use the unit in this mode.
Motion: Use this mode if the motion of images is fast.
This mode can be selected for NTSC, PAL and HD
interlaced signals only.
The color temperature can be adjusted to User, 6500K or
9300K. The color temperature is fixed at 6500K or 9300K,
but adjustable in the User mode. The User-mode initial
setting is 6500K and it can be readjusted by changing the
R, G and B gain levels.
Used to adjust the red color intensity.
Increase the setting to get higher red color intensity, and
decrease it to get lower one.
Used to adjust the green color intensity.
Increase the setting to get higher green color intensity, and
decrease it to get lower one.
Used to adjust the blue color intensity.
Increase the setting to get higher blue color intensity, and
decrease it to get lower one.
Used to adjust the gamma level from 1.8 to 2.6 in 0.2 increments.
D14: Gamma level at DICOM Part 14.
User: Selectable from the user-preset gamma levels (factory
option setting).
can be set.
15
5. Operation
Advertisement
Table of Contents
