Table of Contents
Advertisement
7. Troubleshooting
The screen size is wrong.
• Check to see if the signal is listed in the applicable signals chart.
• On the Display Control Setting Screen, readjust the H. Position, V. Position, V. Size and
Clock settings.
Images are dislocated.
• Check to see if the signal is listed in the applicable signals chart.
• On the Display Control Setting Screen, readjust the H. Position and Clock settings.
Images are distorted.
• Check to see if the external sync signal is connected with the input signal.
• Look at the Display Control Setting Screen to see if the Clock setting is as specified.
Vertical stripes are found.
• On the Display Control Setting Screen, readjust the Clock and Phase settings.
Too many noises appear.
• On the Display Control Setting Screen, readjust the Clock and Phase settings.
The control keys are inoperative.
• Check to see if the Front Key Lock function is enabled on the User Service Setting Screen.
Hold down the "EXIT" front key and turn on the power, and the control keys are unlocked.
If any of the above troubles still exists, call up the Memory Screen and execute the Factory
Reset. It should be noted, however, that all the user settings are deleted.
Others
• When an input signal is switched to another one, the onscreen image may blink. This is
not a unit failure, however.
20
Advertisement
Table of Contents
