Server Connection Management - Vitek VT-IPSD102H Manual

VT-IPSD102H Manual
a dialog box where the IP address of the server can be changed.
It is possible to change the IP address of a server which has an IP address of a different subnet.
 Grouping of servers
When there are a large number of servers, it is convenient to manage servers in several groups.
Server groups can be created and deleted by using Add Group and Remove Group on the Group
menu. The Modify Group menu is used to add servers to a group or to remove servers from a group.

3. Server Connection Management

 Server connection
If the box is checked in the first column in the Servers (or Channels/Peripheral) tab, the ENVI VMS
will try to connect to the server. If the server is running and the network to the server is normal, it will
be connected immediately and State will be changed to Connected.
Check box to connect or disconnect server
If it fails to connect to the server due to server or network failure, State displays Trying connection.
As soon as the server or network is recovered, it will be connected automatically. ENVI VMS
periodically retries the connection to servers when the check box is checked.
 Server disconnection
If the check box is unchecked, the connection to the server is released and State displays
Disconnected.
-43-