Initialization Of Ip Address - Vitek VT-IPSD102H Manual

 Focus Near, Focus Far, Auto Focus
Adjust the focus
 Sensor Input
When the sensor on the VT-IPSD102H is connected and working, the light turns red.
 Alarm Output
Alarm Output button can trigger an event directly from the Live View page.
 Snapshot
Snapshot button saves a snapshot of the video image currently on display. Captured picture
can be stored as BMP or a JPEG file.
 Talk
Transfer audio to audio device connected to the VT-IPSD102H.

3. Initialization of IP Address

If a system IP address is lost, the system can be reset to a known IP address using the reset button in
the back side of the system:
 While system is in operation, press the reset button for 5+ seconds.
 The system will reboot automatically
 Once the system has been rebooted, the IP address will be set to the following.
- IP mode: Fixed IP
- IP address: 192.168.10.100
- Subnet mask: 255.255.255.0
- Gateway : 192.168.10.1
- Base port : 2222
- Http port : 80
-16-
VT-IPSD102H Manual