Vitek VT-IPSD102H Manual page 20

 Board ID
Network board ID of VT-IPSD102H recognized by system
 Start Time
Latest system boot date and time
 Current Time
Current date & time: Enter a new date and time and press Set Current Time button to
update date & time.
 Time Zone
Time zone: Select time zone of where the system is installed. Depending on the time zone,
Daylight Saving Time will work automatically.
 Automatically synchronize with NTP server
Synchronize system time with an NTP server using NTP (network time protocol). Name of the
NTP server should be registered on NTP server Name.
 Reboot Server
Pressing Reboot Server button will cause the system to reboot. Do not press the Reboot
button unless the server needs a reboot.
 Factory Reset
Set all settings to the factory default values. System log and user registrations are also
cleared.
-19-
VT-IPSD102H Manual