Vitek VT-IPSD102H Manual page 27

 IP Mode
Two IP modes are supported. Depending on the selected mode, further configuration items
come as follows.
IP Mode
Fixed IP
DHCP IP
☞ Please, get IP address information from your ISP provider or network manager.
 DNS
Set DNS server IP address.
 Base Port
Network base port is used for communication between systems. In order for the VT-IPSD102H
and remote systems to be connected together, each port number must be identically set.
 HTTP Port
HTTP port used for web-based connection
 RTSP Port
RTSP port used for RTSP-based connection
 SNMP
VT-IPSD102H can be used as an SNMP agent. It is compatible to both SNMPv1 and
SNMPv2c. Vender specific MIBs for IP camera/server are defined. SNMP listen port can be
set and disabled when it is 0. SNMP trap is also supported. Destination IP and port can be set.
If one of these values is 0, SNMP trap will be disabled.
 Multicast IP
The multicast IP address selection range is between 224.0.1.0 and 238.255.255.255. The
selection can be used only when media protocol is set to Multicast. The multicast address
must be the same for the system to be connected using multicast protocol.
Selection
Local IP Fixed IP address
Local Gateway IP address
Gateway
Local Subnet Subnet mask
N/A
-26-
VT-IPSD102H Manual
Description