Preset Configuration - Vitek VT-IPSD102H Manual

2.7 Preset Configuration

 Preset Name
 Save
Configure up to 15 preset positions. Preset function is not available on some PTZ receivers. Make
sure to check if a PTZ receiver supports preset.
 Preset Configuration
Set the PTZ Presets by following the next steps.
 Move cameras to desired view using PTZ control buttons.
 Enter Preset name.
 Press Set button.
 Once all the presets are set, press Save List button.
 Move to Preset Position
Select a preset from the Preset and press the Go To button. The camera will move to the
selected preset position.
 Move PTZ Camera to normal view
 Press Set Button
-33-
VT-IPSD102H Manual