- DUAL ENCODE
Use Dual Encode
Select On to use dual encode
Dual Encode Algorithm
H.264 and MJPEG can be selected for secondary streaming. Maximum resolution is
720 x 480 and there are 8 steps of resolution. If MJPEG is selected, Preference supports only
Quality mode. Bitrate can be set from 32~1024kbps for Dual Encode.
- MOTION DETECTION
Use Motion Detection
Select Motion Detection function
Motion Detection Area Editing
Configure regions for motion detection. Regions of arbitrary shape can be configured by the
following steps.
Enable Edit item.
Select editing Mode. Set is for including cells to motion detection region and Erase is
for excluding.
Select cells using the left button of the mouse. Multiple cells can be selected
conveniently by press and dragging.
Press Apply Edited Area button to save the editing.
Sensitivity
Sensitivity is a condition to trigger an event of motion detection. The value determines the
sensitivity of the motion detection within a block: the smaller, the more sensitive.
It is selectable from from 0 to 10.
-22-
VT-IPSD102H Manual