Pro-Form 10.5qm User Manual page 18

Follow your progress with the track and the
8
four displays.
See step 5 on page 11.
When the program is finished, remove the key.
9
Step onto the foot rails and remove the key from
the console. Keep the key in a secure place. Note:
If the displays and various indicators on the
console remain lit after the key is removed, the
console is in the "demo" mode. Refer to the in-
structions at the right and turn off the demo
mode.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position.
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometres per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button whilst inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The Distance/Laps
display will show the total
number of miles (or kilome-
tres) that the walking belt has
moved.
The Time/Incline display will
show the total number of
hours the treadmill has been
used.
An E for english miles or an M
for metric kilometres, will ap-
pear in the Speed display.
Press the Speed button to
change the unit of measure-
ment.
IMPORTANT: The Cals./
Watts/Pulse display should
be blank. If a "d" appears in
the display, the console is in
the "demo" mode. This mode
is intended to be used only
when a treadmill is displayed
in a store. When the console is in the demo mode, the
power cord can be plugged in, the key can be removed
from the console, and the displays and indicators on
the console will automatically light in a preset se-
quence, although the buttons on the console will not op-
erate. If a "d" appears in the Cals./Watts/Pulse dis-
play when the information mode is selected, press
the Speed button so the display is blank.
To exit the information mode, remove the key from the
console.
18