Healthrider 875p Treadmill User Manual page 22

THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total distance that the walking
belt has moved. The information mode also allows you
to select the metric system or the standard system. In
addition, the information mode allows you to turn on
and turn off the demo mode.
To select the information mode, hold down the Stop
button whilst inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The Distance/Laps display
will show the total number of
kilometres or miles that the
walking belt has moved.
The Time/Incline display will
show the total number of
hours that the treadmill has
been used.
An "M" for metric or an "E" for
English (standard) will appear
in the Speed display. Press
the Speed + button to select a
different system of measure-
ment.
IMPORTANT: The Calories/
Pulse display should be
blank. If a "d" appears in the
display, the console is in the
"demo" mode. This mode is in-
tended to be used only when a
treadmill is displayed in a store. When the console is in
the demo mode, the power cord can be plugged in, the
key can be removed from the console, and the displays
and indicators on the console will automatically light in
a preset sequence, although the buttons on the console
will not operate. If a "d" appears in the Calories/Pulse
display when the information mode is selected,
press the Speed – button so the display is blank.
To exit the information mode, remove the key from the
console.
22