Fluke 225C Programming Reference Manual page 61

=============================================================
-------------------------------------------------------------
Purpose:
Queries the trace data (administration and/or sample data)
related to the waveform from the ScopeMeter.
When a waveform is queried that is still under processing,
the processing is finished first (no half traces returned).
Command Syntax:
QW <trace_no>[,V|S]
<trace_no> = <decimal number>
Page 3.43
QUERY WAVEFORM
<trace_no> Trace Source: (only for Fluke 19x)
---------------------------------------------
10 Scope mode:
Scope Record:
11 TrendPlot 1:
20 Scope mode:
Scope Record:
21 TrendPlot 2:
30 Scope mode, Mathematics
(not available in all versions):
<trace_no> Trace Source: (only for Fluke 19xC)
---------------------------------------------
10 Scope mode:
Scope Record:
11 TrendPlot 1:
12 Scope mode:
13 Scope mode:
20 Scope mode:
Scope Record:
Normal trace INPUT A
Min/Max trace INPUT A
Min/Max trace INPUT A
Min/Max/Average trace
Normal trace INPUT B
Min/Max trace INPUT B
Min/Max trace INPUT B
Min/Max/Average trace
Min/Max trace A+B, A-B or AxB
Normal trace INPUT A
Min/Max trace INPUT A
Min/Max trace INPUT A
Min/Max/Average trace
Min/Max trace INPUT A ENVELOPE
Min/Max trace INPUT A REFERENCE
Normal trace INPUT B
Min/Max trace INPUT B
Min/Max trace INPUT B
QW