Fluke 225C Programming Reference Manual page 62

V | v
S | s
Response Syntax:
<acknowledge><cr>[<trace_data><cr>]
where,
<trace_data> = <trace_admin> | <trace_samples> |
If the optional parameter (V or S) is omitted:
<trace_data> = <trace_admin>,<trace_samples><cr>
This includes the complete information about the trace
(waveform). For detailed descriptions about the waveform
structure, refer to Appendix C.
21
22
23
30
Trace values (samples) only
Setup (administration) data only. When V or S is
omitted, trace values and setup data are returned.
<trace_admin>,<trace_samples>
TrendPlot 2:
Min/Max/Average trace
Scope mode:
Min/Max trace INPUT B ENVELOPE
Scope mode:
Min/Max trace INPUT B REFERENCE
Scope mode, Mathematics:
Min/Max trace A+B, A-B or AxB