5. Operation
5.1 Key Operation
There are seven front keys as shown below.
Power
Standby SW
Indicator
The keys have the following functions.
Standby SW
INPUT1
INPUT2
MENU
CONT/BRT/EXIT : Used to put the contrast, brightness and other settings in memory
If no operation is made within the OSD User Time Out setting, the pre-adjusted settings
are resumed and the OSD disappears.
5.2 Display with a Signal Being Selected
5.2.1 Input Signal Screen Display
5.2.2 Input Display
SDI
: SDI
COMPONENT : COMP
PC
: PC
DVI
: DVI
VIDEO
: VIDEO
S-VIDEO
: S-VIDEO
INPUT1
INPUT2
: Used to turn on and off the power.
: Switching of the input signal set to IN1
: Switching of the input signal set to IN2
: Used to display the menu.
: Used to select the setting menu, to make adjustments.
: Used to select the setting menu, to make adjustments.
and to exit.
IN1: "Input" "Signal"
Signal input specified to IN1
When no input signal is set: IN2 :
Fan indication
MENU
Abnormality: Stop using the unit and
contact the sales agent.
8
CONT/BRT/EXIT