Table of Contents
Advertisement
Review mode
Selecting record and review modes
After turning on, the LEICA S2 is always in record mode, i.e. the
monitor (1.22) remains dark – once it is ready to use (see p. 21).
To review the pictures, you can choose between two modes:
- PLAY
Review for an unlimited time
- Auto Review.
Brief review after taking the picture
Review for unlimited time - PLAY
Setting the function
Select normal review mode by briefly pressing button 1.20,
regardless of whether this is done
- from record mode, i.e. with the monitor turned off, or
- from image data review (4.3, see p. 47), or
- from
. mode.
• The last picture taken appears in the monitor along with the
corresponding displays 4.1.1 – 4.1.7 (see p. 11). However, if
the memory card inserted does not contain any image files,
the following message appears when you switch to play
mode: No Image To Display
46 / Selecting picture taking and play modes / Review for unlimited time / Automatic review of last picture
Automatic review of last picture
In Auto Review mode, each picture is shown in the monitor
(1.22) immediately after it has been taken.
The function allows you to
- select the time for which the picture is displayed, and
- review the image data with and without histogram (see p. 47).
Setting the function
1. In the SETUP section of the menu (see p. 13/22), select Auto
Review (5.23),
2. first select Duration in the submenu, and
3. select the required function or time in the next submenu:
(Off, 1 Second, 3 Seconds, 5 Seconds, Hold).
4. To choose whether you want the picture to appear with or
without a histogram (see also p. 47), return to the first sub-
menu,
5. select Histogram,
6. and set the preferred option (On, Off).
Notes:
• From Auto Review. mode, you can switch back to PLAY
mode (see above) at any time.
• Even pictures that have not yet been transferred from the
camera's buffer memory onto a card - the LED 1.19 is still
flashing - can be viewed immediately. By contrast, the pic -
tures on the cards cannot be accessed while data transfer is
still in progress.
• The LEICA S2 stores pictures in line with the DCF standards
(Design Rule for Camera File System).
• The LEICA S2 can only review image data taken with cameras
of this type.
• If you simultaneously save the image data in JPEG and DNG
format (see p. 31), the image displayed is always based on the
JPEG file.
• If using the serial exposure function (see p. 32) or automatic
bracketing (see p. 35) both record modes will display the last
picture in the series first. For details of how to select the
other pictures in the series, see p. 48.
Advertisement
Table of Contents
