Simultaneously Viewing Several Smaller Pictures; Selecting One Of The Smaller Pictures; Switching To The Other Memory Card - Leica S2 Instructions Manual

Retaining the zoom when „scrolling"
When the Zoom Lock function is activated, the set zoom is
retained when you view other pictures.
Setting the function
1. In the SETUP section of the menu (see p. 13/22), select
Zoom Lock (5.31), and
2. select the desired function in the submenu.
3. In normal review mode (4.1) and with an enlarged picture,
press any of the 4 buttons 1.20, 1.21, 1.23, or 1.24.
• The image field shows -for 5s - the 4 fields 4.1.9 – 1:1,
4.1.10 – INFO, 4.1.11 – PROTECT and 4.1.12 – DELETE for
the button functions valid in this situation.
4. Press and hold button 4.1.9 to select other pictures by tur-
ning the click wheel (1.18) while retaining the enlargement
and the zoom.
Note:
This function is also available in INFO review mode (4.2, see p. 47).

Simultaneously viewing several smaller pictures

Turning the click wheel (1.18) to the left
- reduces the size of enlarged pictures, and turning beyond a 1:1
representation
- allows simultaneous viewing of 4 or 9 pictures.
• The green frame indicates a single picture when viewing 4 or
9 (the one previously shown at full size), all 9 pictures if you
continue turning to the left.

Selecting one of the smaller pictures

1. Press the click wheel (1.18) to activate the selection function.
• The frame color changes from green to red.
2. You can select the other pictures by turning the click wheel.
• If the frame is around one picture, the red frame moves
from picture to picture a line at a time in an endless loop
and if it is around 9 pictures, it moves to the next group of
9, one block at a time.
3. To deactivate the selection function, press the click wheel
again.
• The frame color changes back to green.
4. Turning the click wheel to the right again allows you to re-enlarge
the framed picture (see above „Image review zoom in").
Retaining the zoom when „scrolling" / Simultaneously viewing several smaller pictures / Selecting one of the smaller pictures / Switching to the other memory card / 49

Switching to the other memory card

1. Turn the click wheel (1.18) to the left beyond the display of 9
pictures.
• The selection menu with representations of the two cards
appears in the monitor. A green frame indicates the cur-
rently active card.
2. To activate the selection function, press the click wheel.
• The frame color changes from green to red.
3. You can switch from one card to the other by turning the click
wheel again.
• The red frame moves between the cards.
4. To deactivate the selection function and activate the framed
card, press the click wheel again.
• The frame color changes back to green.