Deleting Pictures - Leica S2 Instructions Manual

Deleting pictures

1. In normal review mode (4.1) press any of the 4 buttons 1.20,
1.21, 1.23, or 1.24.
• The image field shows -for 5s - the 4 fields 4.1.9 – MENU,
4.1.10 – INFO, 4.1.11 – PROTECT and 4.1.12 – DELETE for
the button functions valid in this situation.
2. Press the Delete button.
• The image field shows
– the 4 fields 4.5.1 - All/Single, 4.5.2 - BACK, 4.5.3 – Pro-
tect and 4.5.4 – OK for the button functions valid in this
situation.
– the 2 fields 4.5.5 - Delete? and 4.5.6 - Single/All for the
currently active functions, and
– if applicable the symbol (4.5.7) for a protected picture. In
such cases, the OK button is not available and the font
color changes from white to gray to indicate this.
3. Use button 1.24 to select whether you want to delete only the
picture shown or all pictures,
• The entries in fields 4.5.1 and 4.5.6 change.
Notes:
• If deletion of single pictures is active, other pictures can be
called up by turning the click wheel (1.18).
• You can use button 1.23 to switch directly to the menu for pro-
tecting pictures (see previous section).
• The BACK button takes you back to step 2.
• Protected pictures are not deleted. After deleting, the last
(highest number) of the remaining pictures appears.
To delete only one picture
4. Press the OK button to execute the delete process.
• The next picture not deleted appears in the monitor.
If this was the only picture, you will see the message: No
Image To Display
To delete all pictures
4. Press the OK button.
• The following query appears in the monitor:
Delete ALL pictures?
Note:
The BACK button takes you back to step 2.
5. Press the OK button to confirm and execute the delete process.
• The monitor shows the message: No Image To Display
Note:
Protected pictures are not deleted. After deleting, the last
(highest number) of the remaining pictures appears.
Deleting pictures / 51